Fudge-Making Mistakes and How to Fix Them (2024)

Home Recipes Candy Fudge

Fudge-Making Mistakes and How to Fix Them (1)

ByLindsay D. Mattison

Taste of Home's Editorial Process

Updated: May 05, 2024

    Homemade fudge can be a little fussy, but it's easy to make if you avoid these common fudge mistakes.

    1/9

    Fudge-Making Mistakes and How to Fix Them (2)

    Molly Allen for Taste of Home

    Bitter Taste

    If your pot heats unevenly, chances are good the sugars will burn, giving fudge an unpleasant, acrid taste that’s impossible to fix. This is often the result of a pot that’s too thin. Instead, invest in a heavy-bottomed, stainless steel pot to set yourself up for success.

    2/9

    Grainy Fudge

    Does your fudge have a gritty or grainy texture? The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

    3/9

    Fudge-Making Mistakes and How to Fix Them (4)

    Fudge Didn’t Set

    If your fudge turned out super sticky, or it didn’t set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F). By the way, here’s how to make microwave fudge if you need a new batch in a pinch.

    4/9

    Fudge-Making Mistakes and How to Fix Them (5)

    TMB studio

    Too Soft or Too Hard Fudge

    The amount of time you cook fudge directly affects its firmness. Too little time and the water won’t evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won’t contain enough water, making it hard with a dry, crumbly texture. Pay attention to the timetable specified in the recipe, and you’ll get the hang of it after a batch or two.

    Here’s how to make homemade fudge step by step.

    5/9

    Fudge-Making Mistakes and How to Fix Them (6)

    TMB studio

    Oily Fudge

    Fudge is basically an emulsion between sugar, butter and milk. If the butter gets too hot, it can separate, causing the fudge to become oily on top. This is easy to prevent by monitoring the temperature with a candy thermometer, but separated fudge can also be fixed.

    To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

    6/9

    Fudge-Making Mistakes and How to Fix Them (7)

    TMB studio

    Sugar Crystals Formed

    It’s important to beat the fudge ingredients to develop the right texture, but you won’t get smooth, creamy fudge if you beat it when it’s too hot. Beating fudge when it’s still over heat creates sugar crystals, aka the grittiness you feel in the fudge. Instead, wait to pick up the spoon (our Test Kitchen loves using wooden spoons) until the fudge drops to between 110 and 113°F, about 15 minutes.

    7/9

    Fudge-Making Mistakes and How to Fix Them (8)

    Rock Hard Fudge

    Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen. If you beat the fudge any longer, you might notice it start to seize, which tells you you’ve gone too far.

    8/9

    Fudge-Making Mistakes and How to Fix Them (9)

    TMB Studio

    Bland Tasting Fudge

    Your fudge will only be as good as the ingredients you use. Quality butter, chocolate chips and vanilla extract will create a luxurious base that will hardly need anything to amplify the sweetness. Beyond the basics, our Test Kitchen recommends mix-ins of equal quality. For example, if you want all-out with the best chocolate brands, do the same for any nuts, extracts or candies. You can make candy-shop quality fudge by toasting nuts before mixing into the fudge or making sure you’re not using last year’s peppermint sticks to crush into this year’s fudge. The fresher, the better!

    9/9

    Fudge-Making Mistakes and How to Fix Them (10)

    Nancy Mock for Taste of Home

    Complicated Fudge

    Fudge-making requires time and attention to detail, but some of our favorite fudge recipes use a shortcut: sweetened condensed milk. These recipes don’t require a candy thermometer or any specialized equipment, so they’re perfect for beginners or anyone running short on time.

    Originally Published: January 23, 2021

    Author

    Lindsay D. Mattison

    Lindsay has been a food writer, recipe developer and product tester for seven years. She’s a culinary school graduate who specializes in sustainable food and seasonal ingredients. She draws on her professional chef background to develop recipes and help home cooks gain confidence in the kitchen. When Lindsay isn’t writing, you’ll find her coo...

    Read More

    Fudge-Making Mistakes and How to Fix Them (11)

    Fudge-Making Mistakes and How to Fix Them (2024)

    FAQs

    Fudge-Making Mistakes and How to Fix Them? ›

    Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture. Pay attention to the timetable specified in the recipe, and you'll get the hang of it after a batch or two.

    What to do with failed fudge? ›

    My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.

    Can I fix fudge that didn't set? ›

    OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

    What not to do when making fudge? ›

    7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
    1. Using the Wrong Pan. All candy and confections start by melting sugar. ...
    2. Stirring the Sugar. ...
    3. Not Using a Candy Thermometer. ...
    4. Leaving Out the Parchment Paper Lining. ...
    5. Skipping the Cooking Spray. ...
    6. Scraping the Pot. ...
    7. Using a Cold Knife to Slice.
    Dec 16, 2015

    What is the secret to good fudge? ›

    You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

    How do I fix messed up fudge? ›

    To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

    What happens if you over stir fudge? ›

    Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.

    Why won't my 2 ingredient fudge set? ›

    The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

    Can I freeze fudge to make it set? ›

    Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else. Make sure to use the parchment paper to line your pan otherwise it might be quite tricky to remove the fudge.

    How to make fudge creamy and not grainy? ›

    By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

    Should you stir fudge as it cools? ›

    While you shouldn't mix the fudge mixture when it's hot, you should beat the mixture once it has been removed from the heat and cooled. Once again, turn to your candy thermometer.

    What to do if you forgot to beat fudge? ›

    If you forget to beat the fudge, try heating it back up over low heat, then beat it once it's slightly softened. If you beat the fudge too soon, the crystals will be too large, and the fudge will be grainy.

    Why can't you make fudge when it's raining? ›

    As strange as it sounds, it is a fact that weather affects fudge making. This is because when the weather is damper with an increased humidity level your Homemade Fudge Recipe will take longer to boil.

    Do you stir fudge while it is boiling? ›

    In both cases, sugar and cream must be brought to a boil by gently stirring, then—and this is very important—refrain from stirring again throughout the rest of the cooking process.

    Why didn't my fudge work? ›

    – The most likely explanation is that your fudge didn't quite reach the full temperature it needed to be. If the mixture only ever reaches 110 or 112 degrees celcius it will always be soft. Our advice would be to buy a candy thermometer and take the guesswork out of the fudge making.

    Is evaporated milk or condensed milk better for fudge? ›

    Evaporated milk doesn't have sugar added. The sweetened condended milk is needed as no extra sugar is added to the fudge. If evaporated milk were used then the fudge would not be sweet enough and also would still be too soft unless the fudge is frozen.

    Can you melt and reset fudge? ›

    Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature. Heat slowly to begin with and make sure the mixture goes completely smooth before bringing it to the boil.

    Can you make hard fudge soft again? ›

    You have one option to make it soft, which is you have to put the fudge pieces in a plastic bag along with the paper towel or a bread slice. Secure the bag and leave it overnight, next day you will get a softened fudge.

    Why won't my 3 ingredient condensed milk fudge set? ›

    This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.

    Top Articles
    Latest Posts
    Article information

    Author: Cheryll Lueilwitz

    Last Updated:

    Views: 6189

    Rating: 4.3 / 5 (54 voted)

    Reviews: 93% of readers found this page helpful

    Author information

    Name: Cheryll Lueilwitz

    Birthday: 1997-12-23

    Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

    Phone: +494124489301

    Job: Marketing Representative

    Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

    Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.