Measuring a belt you already own that fits well is the best way to determine your belt size. Lay the belt on a clean, flat surface. Start the tape measure at the hole you use and measure to the end of the belt, where it meets the buckle. Belts are measured in inches and you should round to the nearest inch. If you measure 36 inches, you will want to purchase a size 36 belt.
Note:This measurement technique is standard for Proper Cloth belts. This may not reflect other makers’ measuring standards. For example, some will include the buckle in the belt length measurement.
An easy way to determine belt size is to simply “add 2″ to your off-the-rack pant size. For example, if you wear a 36”-waist trouser, then a 38 belt size will be a safe bet. Most will find this simple formula works best for pants worn at a traditional height—close to the natural waistline. For a belt to wear with low rise trousers or jeans, consider adding 3 or 4 to your pant size.
To measure your body for optimal belt size, start by threading the tape measure through the belt loops of your trousers. It’s important to stand in a relaxed, natural position—do not push out your belly or suck it in—when taking the measurement. The measuring tape should be snug. Measure in inches and round to the nearest inch. Choose the belt size closest to this measurement.
General Belt Information
Over time, leather belts tend to stretch. Braided belts even more so. It’s good to keep in mind that a belt thatfits snuginitially will likely wear more comfortably down the road.
Related Articles
How to Measure Your Body for Dress Shirts If you’re ordering a custom dress shirt, one way to create your custom size is to measure your body. The following explanations and videos will show how to...
How to Measure a Dress Shirt Measuring a dress shirt that fits you well is an excellent way to get started creating your first custom dress shirt size. The following explanations and videos will...
9 Style Tips for Shorter Guys Dressing for your height can be tricky, but we’ve got you covered. Here are our best style tips if you’re under 5’8”. 1. Slim Fit is Flattering A...
How to Measure Glove Size Lay your dominant hand flat, fingers together, palm facing upwards. Wrap the measuring tape around your palm, just below the knuckles, not including the thumb. Glove size should...
Put on a pair of pants that fits well and stand in a relaxed position. Then wrap a soft tape measure through the belt loops so the tape is snug but not too tight. This measurement is your belt size. You may need to round up to the nearest even-numbered inch.
An easy way to determine belt size is to simply “add 2″ to your off-the-rack pant size. For example, if you wear a 36”-waist trouser, then a 38 belt size will be a safe bet.
If your pants size is 32, buy a belt size 34. If your pants size is a 34, buy a belt size 36; if your pants size is a 36, buy a belt size 38, etc. The reason you buy a belt size up from your pants size is to give yourself a few inches of room in case your body size ever changes.
When selecting your belt size, the quickest way is to add 2 inches to your pant size. For instance - we advise a size 32 belt if you wear size 30 pants, a 46 inch belt would fit a size 44 waist, a size 50 belt for a 48 waist etc.
To ensure a proper fit, select a belt that is at least 2 inches larger than your pant size (usually the next size up). For example, if you pant size is 34, choose a size 36 belt.
Ideally, though, you want the belt to fit so that the buckle pin goes exactly through the middle hole. That will leave you with about 15cm/6in of leather to the left of the buckle once it's fastened. When in doubt, err on the short side but make sure to have enough to tuck the belt under the first belt loop.
Take your existing pants size and then add two inches to the number. For instance, if your pants waist size is 38, then your belt size would be 40. You can also find your belt size by measuring a belt you already own that fits well.
Most people like to fasten their belt on the middle hole. A useful guideline, although not as accurate as measuring, is to order one size up from your Jeans or Trouser Size: if you wear 32” jeans/ trousers then it is likely a 34” belt will fit. All measurements are approximate.
Simply measure the part of your tummy that is the biggest all the way around your abdomen, which is usually at the belly button. Choose the corresponding band for your size. Just prior to delivery simply subtract 3 to 5 inches from your belly measurement. Select the corresponding band for that size.
Introduction: My name is Kimberely Baumbach CPA, I am a gorgeous, bright, charming, encouraging, zealous, lively, good person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
